Sanitary Butterfly Valve What issues should be paid attention to during installation and use? Professionals from Zhejiang Kingston Fluid Equipment Co., Ltd. listed the following points:

1. Before installing the sanitary butterfly valve, we need to clean the pipes and valves to ensure that there are no scratches and dirt on the sealing surface.

2. When installing the butterfly valve, carefully check whether the connecting clamp model matches, and install a special sealing ring at the connection between the two.

3. After the butterfly valve is installed, we put in the pressure medium, turn the handle at a right angle, and check for leakage.

4. During use, when the butterfly valve is in the closed state, there is still leakage inside, then the sealing ring should be replaced.

5. Do not install the sanitary butterfly valve in a system with strict requirements on the medium flow.