The performance of Sanitary Valve is as follows:
1. Weldability
The welding performance of sanitary fittings varies with their uses. Some tableware does not require welding performance, including some pot companies. However, most products require good welding performance of raw materials, such as Class II tableware, thermos cups, steel pipes, water heaters, water dispensers, etc.

2. Corrosion resistance
Many stainless steel sanitary fittings have good corrosion resistance in food, such as Class I and Class II tableware, kitchen utensils, water heaters, water dispensers, etc. Many foreign businessmen have also tested the corrosion resistance of sanitary fittings: use NACL aqueous solution to heat to boiling, pour out the solution for a period of time, absorb and dry it, and weigh the weight loss to determine the degree of corrosion (Note: When polishing the product, because the sandpaper or sandpaper contains Fe, it will cause rust on the surface during the test).

3. Polishing performance (BQ property)
The polishing performance (BQ property) of sanitary pipe fittings. At present, many industries need to polish stainless steel sanitary pipe fittings. Only a few products such as water heaters and water dispenser tanks do not need polishing. It is very important in terms of raw material requirements.