Sanitary Valve adopts standard electronic polishing, with smooth surface to ensure cleanliness, no media accumulation area, no potential contamination, and can meet the special requirements of various media in the food and biopharmaceutical fields. The sanitary valve is smooth, seamless, and automatically empties the manual fluid channel. It is also very suitable for the needs of on-site steam. The connection method of the sanitary valve can be selected according to the working conditions, such as thread, flange, welding, clamp, ferrule, etc. The sanitary valve is strictly in the manufacturing process. According to the quality control requirements of the FDA, the sanitary valve adopts computer three-dimensional design and is manufactured according to GMP requirements.

The sanitary valve should be placed in a dry and ventilated room, and both ends of the channel should be sealed and dustproof; the long-term storage should be checked regularly, and the machined surface should be oiled to prevent corrosion; before installing the sanitary valve, carefully check whether the mark is consistent with the use requirements; clean the inner cavity and sealing surface during installation, check whether the packing is tight, and whether the connecting bolts are tightened.

The sanitary valve should be installed in accordance with the allowed working position, but attention should be paid to the convenience of inspection and operation; during use, the sanitary gate valve must not be opened to adjust the flow rate, so as not to damage the sealing surface when the medium flow rate is large, and it should be fully opened or fully closed; when opening or closing the handwheel, it is not advisable to use other auxiliary rods. The transmission parts should be lubricated and lubricated regularly; when using the sanitary valve, oil should always be added to the rotating part, and oil should be added to the trapezoidal thread part of the valve stem.