Sanitary Ball Valve manufacturing standards and eight major features

Product introduction:

1. Standards: DIN, SMS, ISO, IDF, 3A, RJT, DS, BS, BPE,

2. Widely used in chemical, petroleum, electricity, pharmaceutical, beer, food, dairy beverages, cosmetics and various engineering supporting pipelines around the world.

3. Made of stainless steel 304, 304L, 316, 316L materials!

4. Main specifications: 3/4"-8"DN8-DN450OD9.7-OD469 wall thickness: 1.2MM-6MMR=1.5D

5. Main features and performance: resistance to large temperature difference; normal pressure 16MPA; strong corrosion resistance; precision; thin wall thickness.

The sanitary quick-install ball valve products are processed with high-end polishing equipment inside and outside to meet the surface precision requirements. There are quick installation, welding, and threaded connection methods. They are widely used in food, beverages, pharmaceuticals, dairy products, beer and fine chemicals.

Standards: DIN, SMS, ISO, IDF, 3A, RJT, DS, BS, BPE, API, JIS, GB.

The ball valve manufacturing standards of our company are in accordance with:

① "General valve flange and butt welding steel ball valve" GB/T12237-89

② "Iron and copper ball valves" GB/T 15185-1994

③ "General requirements for steel valves" GB/T 12224-2005

④ "Safety evaluation standard for drinking water distribution equipment and protective materials" GB/T 17219-1998

Features:

(1) Small fluid resistance, full-diameter ball valve has basically no flow resistance.

(2) Simple structure, small size and light weight.

(3) Tight and reliable. It has two sealing surfaces, and the sealing surface materials of ball valves are widely used in various plastics, with good sealing performance and can achieve complete sealing. It has also been widely used in vacuum systems.

(4) Easy to operate, quick opening and closing, only need to rotate 90° from fully open to fully closed, convenient for remote control.

(5) Easy to maintain, the ball valve has a simple structure, the sealing ring is generally movable, and it is relatively easy to disassemble and replace.

(6) When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when passing through.

(7) Wide range of applications, diameters range from a few millimeters to several meters, and can be used from high vacuum to high pressure.

(8) Since the ball valve has a wiping property during the opening and closing process, it can be used in media with suspended solid particles.