Sanitary Ball Valve is made of SUS304 and 316L, which can meet the special requirements of various media in the field of food and biopharmaceuticals. Its smooth, seamless, and automatically draining manual fluid channels are also very suitable for steam stepping on it for cleaning in place. During the manufacturing process, it strictly follows the FDA requirements for quality control, adopts computer three-dimensional design, and is manufactured for GMP requirements.
It can meet the special requirements of various media in the field of food and biopharmaceuticals. Its smooth, seamless, and automatically draining manual fluid channels are also very suitable for steam and other CIP cleaning in place.
The following are the installation tips for sanitary ball valves:
1. Install a sealing gasket between the valve flange and the pipeline flange according to the pipeline design requirements.
2. For all kinds of manual valves installed on the insulation pipeline, the handles must not be downward.
3. For sanitary ball valves with transmission mechanisms, install them according to the product instructions.
4. The installation position, height, and inlet and outlet directions of sanitary ball valves must meet the design requirements, and the connection should be firm and tight.
5. Before installing the valve, an appearance inspection must be carried out. The nameplate of the valve should comply with the provisions of the current national standard "General Valve Marking" GB 12220. For valves with working pressure greater than 1.0 MPa and that serve as a cut-off on the main pipeline, strength and tightness performance tests should be carried out before installation, and they can only be used after passing the test. During the strength test, the test pressure is 1.5 times the nominal pressure, and the duration is not less than 5 minutes. The valve housing and packing should be leak-free to be qualified. During the tightness test, the test pressure is 1.1 times the nominal pressure; the test pressure should meet the requirements of GB50243 during the test duration, and the valve disc sealing surface should be leak-free to be qualified.

The advantages of sanitary ball valves are as follows:

1. The opening and closing range is 0-90°, and it can be fixed every 15°, with good adjustability and simple and convenient operation.

2. The valve stem is inlaid with nylon bushings to reduce friction and achieve flexible opening and closing.

3. Open and close through the rotation of the shaft to achieve throttling or cutting.
4. The handle of the sanitary ball valve adopts the pull type and the pull type, which can withstand a large working torque and is not easy to break.

5. Installing a worm reducer on the valve stem can not only make the ball plate self-locking, but also improve the operability of the valve.

6. The sampling fatigue life test is not less than 30,000 times to ensure that it has a good service life.

7. The sanitary ball valve has undergone rigorous strength and sealing tests, and is light, beautiful, smooth and clean.

8. Made of stainless steel and edible rubber, it has high sanitary quality.

9. The sanitary ball valve adopts a detachable connection, simple structure and easy maintenance.