Sanitary Ball Valve Technical Parameters
Pneumatic sanitary ball valves have all undergone precise inspection processes and strict quality management, and the flow channels have been precisely polished and sterilized. The valve body is made of stainless steel; the inner wall of the flow channel is electronically polished with 0.5um (240Grit) to keep the fluid unobstructed; the sealing surface uses a full-cover PTFE without dead corners, ensuring hygiene and easy cleaning; the two ends are connected with clamps for easy disassembly, cleaning and maintenance. Pneumatic sanitary ball valves are widely used in beer engineering, food engineering, chemical engineering, pharmaceutical engineering, bioengineering and water treatment engineering.

Product Features

1. The aperture size of the pneumatic sanitary ball valve is consistent with the pipeline, and no sediment is generated.
2. The inner wall of the flow channel of the pneumatic sanitary ball valve is polished with 240Grit to ensure that the flow channel is unobstructed.
3. The pneumatic sanitary ball valve uses a full-cover PTFE seal with no dead corners and is easy to clean.

Pneumatic actuator

Adopt the new GTD series or ATD series pneumatic actuator, which has double-acting and single-acting (spring return), gear transmission, safe and reliable; large-diameter valves adopt AW series pneumatic actuator fork transmission, which has reasonable structure, large output torque, and double-acting and single-acting.
1. Gear-type double piston, large output torque, small size.
2. The cylinder is made of aluminum, light weight and beautiful appearance.
3. Manual operating mechanism can be installed on the top and bottom.
4. Rack connection can adjust the opening angle and rated flow.
5. The actuator can be equipped with electrical signal feedback indication and various accessories to realize automatic operation.
6. IS05211 standard connection provides convenience for product installation and replacement.
7. The adjustable screws at both ends can make the standard product have an adjustable range of ±4° at 0° and 90°, ensuring the synchronization accuracy with the valve.