Sanitary Ball Valve has the characteristics of flexible operation, reliable sealing and convenient maintenance, and is widely used in industries such as industry, chemical industry, petroleum, metallurgy, etc. However, the quick-install ball valve may also have various faults during use, which need to be analyzed and maintained.
Common quick-install ball valve faults:
1. Leakage: The leakage of the quick-install ball valve may be caused by damage to the sealing surface, loose connection or improper operation. The solution is to replace the seal, tighten the connection or adjust the operation.
2. Stuck: The quick-install ball valve may be stuck, causing the valve to be unable to open or close. This may be caused by damage to the ball or defects during operation. The solution is to replace the ball or re-operate.
3. Wear: Due to the frequent friction between the sealing surface and the ball of the quick-install ball valve, wear may occur during long-term use, and affect the sealing and operating performance. The solution is to regularly check and replace damaged parts.
Maintenance of quick-install ball valve
1. Regular inspection: Regularly check the operating performance and sealing performance of the quick-install ball valve, including appearance, connection and operation, and timely discover and eliminate faults.
2. Cleaning and maintenance: Clean the inside and outside of the quick-install ball valve at regular intervals and apply appropriate lubricating oil to maintain normal operation and extend its life.

3. Replacement of accessories: Damaged or aged accessories in the quick-install ball valve should be replaced in time to ensure the normal operation and safety of the equipment.

In short, the normal maintenance and care of the quick-install ball valve is very important to ensure the normal operation and extend the life of the equipment, and regular inspection, cleaning and replacement of accessories are required.