Sanitary Ball Valve Use in various raw water tanks and pumps

Sanitary ball valve raw water tank

Sanitary ball valve reverse osmosis system

The reverse osmosis device uses sufficient pressure to separate the solvent (usually water) in the solution through the reverse osmosis membrane (or semi-permeable membrane). Because this process is opposite to the direction of natural osmosis, it is called reverse osmosis. The reverse osmosis method can adapt to various raw waters with salt content, especially in water treatment projects with high salt content, and can obtain good technical and economic benefits. The desalination rate of the reverse osmosis method is improved, the recovery rate is high, the operation is stable, the footprint is small, and the operation is simple. While removing salt, the reverse osmosis equipment also removes most bacteria, colloids and large molecular weight organic matter.

Store raw water for precipitation of large sediment particles and other precipitable substances in the water. At the same time, buffer the impact of unstable water pressure in the raw water pipe on the water treatment system. (Such as the reaction of pressure sensors caused by too low or too high water pressure).

Sanitary ball valve raw water pump

Constant system water supply pressure and stable water supply.

Multi-media filter

The filter with multiple filter layers is mainly used to remove sediment, rust, colloids, suspended matter and other particles above 20um in the raw water. Manual sanitary ball valve control or fully automatic controller can be used for backwashing, forward flushing and other operations. Ensure the water quality of the equipment and extend the service life of the equipment.

Sanitary ball valve activated carbon filter

The system uses fruit shell activated carbon filter. Activated carbon can not only adsorb electrolyte ions, but also perform ion exchange adsorption. The activated carbon adsorption can also reduce the oxygen consumption (COD) of potassium permanganate from 15mg/L (O2) to 2~7mg/L (O2). In addition, due to the increase in the concentration of adsorbed and replicated surfaces due to the adsorption effect, it also plays a catalytic role, removes pigments, odors, a large amount of biochemical organic matter in the water, reduces the residual chlorine value of water and pesticide pollutants, and removes trihalides (THM) and other pollutants in the water. At the same time, the equipment has a self-maintenance system and the operating cost is very low.

Sanitary butterfly valve ion softening system/dosing system

In order to concentrate and discharge dissolved solids and utilize fresh water, the R/O device prevents the concentration product of CaCO3, MgCO3, MgSO4, CaSO4, BaSO4, SrSO4, and SiSO4 from being greater than their equilibrium solubility constants and crystallizing on the concentrated water side, especially on the concentrated water side of the last membrane assembly of the RO device, which damages the proper characteristics of the membrane original. Before entering the reverse osmosis membrane assembly, an ion softening device or an appropriate amount of scale inhibitor should be used to prevent the crystal precipitation of carbonate, SiO2, and sulfate.

Sanitary ball valve precision filter

Use precision filters to remove suspended solids, non-straight particles, colloids and other substances remaining in the inlet water, so that the operation of subsequent equipment such as the RO system is safer and more reliable. The filter element is a 5um melt-blown filter element, the purpose of which is to remove impurities larger than 5um that are missed by the upper filter unit. Prevent it from entering the reverse osmosis device to damage the surface of the membrane, thereby damaging the desalination performance of the membrane.