Sanitary Ball Valve is used to control corrosive or highly corrosive media. The inner surface of the valve body is covered with various fluoroplastics that can be selected, which are suitable for different working temperatures and fluid pipelines. So do you know what are the installation methods of fluorine-lined ball valves?

The installation methods of fluorine-lined ball valves are as follows:
1. During installation, pay attention to check whether the valve markings (such as valve type, nominal diameter, pressure level, material, etc.) are consistent with the use requirements, and whether the flow direction markings on the shell are consistent with the flow direction of the pipeline.
2. During installation, try to install it horizontally with the valve stem facing upward. Prevent the valve from tilting so that the valve is installed in a natural state, prevent the valve from generating large installation stress due to pipelines, supports, etc., and do not use hand wheels to lift the valve during installation and lifting.
3. During installation, if the pipe flange sealing surface connected to the fluoroplastic lining sealing surface at both ends of the valve is metal, a fluoroplastic sealing gasket must be added. The flange sealing surface connected to it should be in the structure of Figure A, and the structure of Figure B should not be used, otherwise it will cause premature damage and leakage of the valve sealing surface.
4. If the pipeline has sufficient strength to bear the weight and operating torque of the valve, the valve may not be supported. Otherwise, support points should be set for the fluorine-lined valve.
5. After installation, the valve must be in the fully open position when the system or pipeline is pressure tested.

Fluorine-lined valve products include fluorine-lined diaphragm valves, fluorine-lined stop valves, fluorine-lined ball valves, fluorine-lined butterfly valves, fluorine-lined check valves, etc., and their manufacturing technology includes the formula of adhesives and their production process.