Sanitary Ball Valve is a ball valve that can maintain fluid flow in a high temperature and high pressure environment. It is a valve that meets sanitary standards and is made of stainless steel and other materials. So do you know what to prepare before installing a sanitary ball valve?

Before installing a sanitary ball valve, you need to do the following preparations:

1. Prepare the pipes connected to the sanitary ball valve, and the front and rear pipes must be coaxial, and the two flange sealing surfaces should be parallel; the installed pipes can withstand the weight of the sanitary ball valve, otherwise appropriate support needs to be installed.

2. Clean the connecting pipes and clean the internal dirt and impurities.

3. Check the logo of the sanitary ball valve and open and close it several times to ensure that it can be put into normal operation.

4. Remove the maintenance parts on the flanges on both sides of the sanitary ball valve.

5. Clean the valve hole and valve seat, blow away fine particles and impurities, and avoid wear on the sealing surface.

A sanitary ball valve is a type of valve. The sanitary ball valve is mainly used to cut off or connect the medium in the pipeline.